I upgraded all my lights to LED, if any one needs these housings and gold bezels just pay shipping. Aprox 15 housings may be more.

Jason

[image] [/image]

Anyone know how many people can safely fit on a 1996 carver 355 aft cabin? We are having an engagement party and would like to do a short harbor cruise? I've had 6 people on it last summer (our first year), but we are looking at about 15 this time. Tried to find answers online but feeling like a complete rookie.
I know that we're need 1 life jacket per person but does the coast guard limit how many people?
Thanks for your help.

HI All
I edited my question from last year, I don't know if it shows up as a new post?
I am replacing my interior 20 w halogen lights, with 2W G4 LED , which was recommended to me on my post in the fall. The ones I purchased say non dimmable on the web page, does any one know where i can source the dimmable LED's, I only need for the salon. I have changed out the rest of the boat.
thanks
Don

The port prop shaft in my 1985 3207 with crusader 270s offers more resistance to turning than the starboard shaft. The starboard shaft rotates quite easily by hand whereas the port shaft has noticably more resistance to it. Not crazy, but is definitely noticeable.

The marina mechanic said my starboard side cutlass bearing could use replacing. There isn't much movement in my opinion to warrant replacing yet, but in any case, that is the side that turns more easily, which doesn't make sense to me.

Could it be something in the port engine or transmission that is causing greater resistance?

I was looking for new anchor line and thought I'd pass this link along. I only needed 1/2 in for my 3207, but bought this 5/8 150' for the same price. no, I'm not a seller. Just sharing the link as it seemed like a good deal..

https://www.amazon.com/dp/B0753DD6GD/ref=cm_sw_r_cp_apa_glt_fabc_0WA5EGGQ8MZKC45PV7JR

Hey folks.
I would like to know how you clean and condition the 'ultra leather' fabric in the main salon? I did find this one item that specifically states 'ultra leather' in its language but could not find anything else. https://www.goclean.com/page_458_125/leather-vinyl-care
The Carver documentation does not mention 'conditioning' the fabric.
I am gonna reach out to the Ultrafabric company on Monday to hear what they say but am interested if any of you folks are doing anything to keep it looking good.
Thanks.

Folks;

My boat currently has a Volvo Penta QL Bow Thruster and I am still researching stern thrusters. I have a large rock shelf on the port side of my boat slip that gives me a bit of stress on a windy day, as the wind has a tendency to push the stern over. I have been fine so far, but I just think a stern thruster in addition to my bow thruster would be really handy. Cost has been a big factor in this decision, but the search still goes on.

I have been looking at two types so far.

The Side Power stern thruster attaches to the transom above the water line and is wireless to the helm switches. It can also thruster to wireless that will work with their dual joy sticks as well as a wireless remote. I can install this unit myself and they suggest it will take 6-8 hours.

The other one is more common and made by Side Power. This unit has the motor mounted inside the boat and a tunnel on the outside below the water line. This requires a number of holes (10) to drilled through the transom under the water line. The installation of this unit would be a bit more complicated and may require the assistance of a professional. The struggle would be ensuring there is sufficient room on the inside of the transom for the motor. This unit also has a dual joystick that will operate the QL.

Both units are approximately the same dollar value, however, if you add professional installation you are double the cost, which makes me wonder if it is worth it in the end.

I posted this to see if anyone has any experience with either of the products and offer an opinion to assist me in making the best decision.

Thanks in advance.

Greg

Just wanted to say hi. We've lived aboard now for over seven years on a variety of boats. In the middle of transitioning to an 88 Santego 27 that we just acquired. In decent shape, but LOTS of questions. Thanks for adding us.

M

Just. . . and I do mean Just. . .acquired an 88 Santego 27. It's in great shape, but the control console has bleached out totally, leaving me facing a bank of switches and guages with no idea at all what they're supposed to do. We've done a good deal of switch flipping and trying to see what happens, but that strikes me as somewhat ill-advised. Does anyone have a console map for this vessel? The owner's manual (original) oddly doesn't appear to have one. I guess they just figured you'd read the labels. . . .which are now blank.

Anyone?

I've bought a boat that *needs work*. One of the fuel tanks has had a gasoline leak for some time. Now with the leaking tank removed, how do I go about getting rid of the lingering gas smell? Naturally my main concern is with soft surfaces. I don't mind replacing the carpet, but I don't want to have to remove the headliner.

Thanks.