I am a new Carver Owner I bought A 2000 356 Aft Can anyone tell me if the Shower Drian goes in to the tank on does it flow through a through Hole and out. My Regal always emptied through a through hole and out. It just seems that the black tank fills really fast ????????

I am currently away from my 396, but looking to come up with a solution for shore power.

Currently, I have a 50 amp (male) to two 50 amp y that allows to plug both 50 amp power cables coming from the boat into one connector ashore.

What I am looking to do is use one cord, with the y at the boat (female) end.

My question is this, what is the spec for the boat receivers, 50 amp 125v or 50 amp 125/240v

It’s time to get the bottom painted. I’ve read so much, I now have no idea what should be done. It’s a 1988 3807. I currently have no interest in it seeing salt water at least as far into the future as I can see. It has barrier coat and probably had ablative paint on top of that, but that’s totally gone. The painter said it was up to me. He said if no barrier coat was on there he normally does 5 coats. If mine is in decent shape, he’d do 2 or 3, then put on the ablative. I Think he uses Interlux ...

The boat has been doing great all summer without issues except for this weekend. I opened up the engine hatches to check everything before I took it out and the bilge had a lot of water in it. I grabbed the boat hook and flipped the float switch up and nothing happened. I went on the bridge and flipped the switch and nothing. I checked the inside bilge and the same thing happened. I flipped the breakers (including the main one) and I checked again, no luck. On a hunch, I checked the bilge blower ...

Has anyone had the push fit- fittings break down over time ?

Just picked up a 2007 38ss on lake Winnipesaukee

Hello all. Thought I'd share some pics of my painting efforts in the engine room. I had poor lighting and faded dirty paint. I feel like I need sunglasses down here now, I love it. Dave.

hello, I am hoping to purchase a carver santego 30 next spring to keep on lake michigan "michigan city" . hoping to find out what to look for with this particular vessel, any thoughts or opinions would be appreciated. I have been on 2 of them and love the whole design and functionality of them.

I had a RAYPILOT 650 with a Type I pump on my 1994 CARVER 390CPMY. I finally found the label on the cylinders, and have the capacities, so I am wondering if I bought the proper pilot? I went on what was on here. Does anyone know if the steering (SEASTAR) cylinders were plumbed up as parallel or series? If series I am A OK, if Parallel than I hav bought the wrong unit and will be eating Auto Pilot pie.

We are new to the forum, and are in the process or purchasing a 2003, 360 Sport Sedan with 8.1 Volvo's. The initial inspection and survey went very well. Everything dry, tight, solid and in tact. When we started the motors for the sea trial, the starboard motor stalled, restarted however shows low voltage? The owner said he has replaced the battery already and needs to fix the low idle?forum



At this point we were out of time and will come back for the sea trial and short haul Wed.



Any thoughts o ...