I have a 1980 2667 Santa Cruz, I have the upper and lower stations and need oil pressure and water temp. senders, I removed the original Volvo 350 and sold it with the senders. Anyone know part numbers or values of the original senders . I think the senders have to be for duel station. Thanks in advance!

Hello All,

Hope someone can help, just finished restoring a 25' Carver Camper with OMC 235 (351W) and Stringer outdrive. I'm getting around 15-16 knots at around 3400 RPM. Does that sound about right? My question is, What should my max RPM/Speed be once i break the engine in? Is it ok to run these engines WOT? Also does anyone know if the stock propeller is good or should I consider a different pitch prop for higher top speed? Thanks!

New to the forum
Purchased my 1983 3207 Aft Cabin in July of 2006.
Seems well maintained
waiting for the MI lakes and river the thaw from old man winter grip.
She sports twin 350 Crusader's
Her port is in the Anchor Bay area of Lake St Clair, north of Detroit MI

I need to replace a section of the rubber and metal rub rail on my starboard side. I called TACO but apparently they didn't supply CARVER with rub rails. I'd like to get the same brand as what Carver installed but I'm finding it challenging to find an exact match. Any help is greatly appreciated!

i have a 1994 250 express and i am missing the actual latch that keeps the doors from flapping when they r shut. i have tried carver, south co who made the part and ugly fish who they referred me to and still cant find part. does anyone have a pic or info on an actual part number for this item. i have the lock at the top just missing the latch.

Hi does anyone know the size of the flax packing needed for a 1991 carver 3608 im not with my boat at the moment and I wanted to order some off the net. Thanks lee

Hi,
I have a 89 carver there is a vent valve in line with the hose going in to the holding tank looks like 1/1/4 or 1/1/2 it looks like a tee in line now it's leaking when I flush the head does anybody know where I might get one I tried all the places I know of
Thanks
Gary

Where can you get plumbing photos or drawings for a 2001 Carver 444 CPMY?

Hi all I have an 88 Carver 3257 that I bought last September and after quite a bit of work, just about have it ready to live on. There is still 1 leak in the hosing/pipe from the water connection at the front of the starboard engine going back to the toilet. There is no way to get to it from the engine side and I'm trying to figure out the easiest way to access the hoses as they run from the engine hatch to the forward head.

The only real access seems to be under the dinette seat to the right of the stairs coming in to the cabin, which would require removing the seat to be able to get to the hoses. Is there an easier way?

I'd appreciate any advice from anyone who's done this kind of thing.

Thanks so much

Needed to add a cook top exhaust blower without tapping into the cabinet space above. Off the shelf versions would not work due to dimensions and location of exhaust ports so I came up with this.