Hi All, Just trying to plan some winter projects. Does anyone have any knowledge about these devices? I have Volvo D6 Diesel's with the EVC but it's an older version that doesn't interface to the EVC displays. Hoping something like this will work as I'd like to check my turbo's, fuel consumption, fault codes from my engines. etc... on my Garmin 7212's or other MFD's. Thanks,

Hello, Just purchased a 1990 Carver 3608 with Mercruiser 7.4 carbureted engines and a Westerbeake generator. What oils do you recommend? synthetic vs non synthetic? . They have 700hrs on them. Thanks for an input.

We have a 2000 53 Carver Voyager. The rudder indicator is off by one mark. I can’t find anyway to adjust the rudder unit. Has anyone had this issue and corrected it? Thanks in advance.

I'm looking at a 1992 Carver 43 CPMY. The hull sides are cored, but I can't really find much information on how the hull is constructed below the waterline. How thick is the layup, are the stringers fiberglassed plywood or a composite and is the transom solid fiberglass or is it backed with plywood or some other material?

I'd like to know what the switch (fuses) panel originally looked like in my 1992 26 Command bridge / 280 Sedan bridge Mine has a creative mess and as I'll have to rebuild the thing anyway, perhaps I can do that in style. edit: I was initially looking for the fuse/switch panel but am also interesed in the 'dashboard' (dials around the wheel) edit II: 'helmpanel' as I found some remnants of a previous engine setup. Thanks in advance

I can cut breaker off, then back on. It will run for hours sometimes, then same thing, cuts off, HPF code comes on the thermostat. Any help appreciated.

I am not on the boat and need to order a oil filter for the genny. Can someone tell me what model was installed on the 2000 396? Or provide the part number for the appropriate oil filter. Thanks.