Can anybody tell me the actual height of a 1985 3607 for the purpose of having it hauled down the road? I assume will need to lower the "roll bar" so from flybridge to bottom of the hull.

Recently we changed the fuel filters and afterwards started the engines and they ran fine.

Today the starboard engine coughed, choked and stalled. It won't restart. Have tried twice to restart - no luck.

Suggestions & advice welcome.

Hello all,



I have a deposit on a boat that will be surveyed next week but I found out that it was previously owned in Keswick, Ontario, Canada and was named Lady Jean. The one problem I have is that there is no ownership/maintenance history on this boat (it was in marina inventory when it went through bankruptcy in 2015). I was hoping that maybe someone knows someone who might know any of the previous owners of this boat that might be able to fill in any history/maintenance history for me.



Thanks,
...

Hi, looking for advice on how many bilge blowers should i have on my 1995 Carver Santego 310. There is only 1 and it is not connected to any vent ducting .I am thinking there should be 1 for each engine. If only 1 is required should it vent out the port or starboard side vents.Thanks

Hi Carver-folk!

Just finalized everything (pretty much) today on a brand spanking new (hah!) Riviera 2807. Having it shipped to my front yard soon, will work on upgrading the electronics and fluids while saving thousands in storage-bucks this winter. The survey was very comforting - no moisture throughout except swim platform and bow pulpit - none! Everything in great shape, the only negatives: no upgraded electronics and needs a few maintenance items such as replace trans lubrication, keep an ey ...

Generator won't start...When we were at the dock, we started genny prior to going out on the water & it started & ran fine...Once out on the hook later that night, genny wouldn't start..We get a sort of humming noise when pressing switch..We have tried to start from the switch on the unit with same result..We have replaced the battery..Oil, coolant & water are fine..We replaced the impeller last year as it started but switched off after 10 mins or so...Over heating is not the problem ...

Hi,



We have a 1997 355 AC and we've picked up an odor in salon momentarily after the forward head is flushed. It seems to get worse the more the holding tank holds. This odor goes away 5 mins or so after appearing. My bilge is clean and dry and I was wondering if the vent may be plugged? I'm having a hard time finding the vent. It's almost like it's venting in the boat.



Any advice would be appreciated!!



Thank in advance.



Br,



John

https://philadelphia.craigslist.org/bpo ... 87296.html

Hello, all. I just saw this add on CL. I do not know anything about this, just thought I would put it out there in case anyone may be looking.

I have a carver 2000 406 aft cabin and am trying to get a wiring diagram for the batteries. I have 4 batteries that feed the boats systems. I have a battery charger that keeps these four batteries charged when I'm hooked into shore power.
I have a schematic from the owner's manual which show's all the DC circuits but nothing on the batteries.
Any help would be highly appreciated because I need to remove some of the batteries while still living on the boat and in the water.

Got pulled out this weekend - a little different this year , boat is going into heated indoor storage. It was strange not have to ensure every liquid was removed so it wonldn't freese.