Sad, wonder if it was just and old soft hull that gave way and she fell from the transport. Definately no spring chicken non the less still quite a few of the old Chris Craft in the waters. https://montreal.ctvnews.ca/an-errant-b ... -1.4996738

And is there any of you doing it?

Marc..

Are the 6.2 Mercruisers 320 HP big enough for this boat? And what might be the approximate fuel burn. Upper Chesapeake Bay location (brackish water). And what should the WOT readings be for this model for a Sea Trial?
Plus any specific items to look for when searching for this model boat?

Thanks in advance for any information on this model.

Jon

Just completed a small DYI project on the weekend. Boat came with a Nova Kool RFS 7501 AC/DC under the counter style refrigerator/freezer. It worked fine, but for the Admiral and I, it was just hard to get into and to see what was in the back, without being on your hands and knee's. To be honest it was a pain in the aft. There was also some waisted space in it after it was packed up.



Decided to replace it with a Vitrifrigo DW210 SS AC/DC drawer refrigerator/freezer. Freezer on the top and re ...

Does anyone have one? Any problems? I've heard good and bad things.

I'm anxious to get on the great lakes. I have a few questions to anyone with more experience.

Have an issue with the pump running continuous periodically. At times it will pressurize and shut off though. I checked for leaks and have tightened all clamps/connections I can get at.

Pump is likely original Shurflo, so would it be safe to assume this is a pump issue?

I have drawn the line in the sand as to what I will spend. To get my 6.5CZ Kohler back to reliability. Has anyone switched. Out to a Westerbeke? I have a 390CMY vintage 1994, and wish to keep in same place. Between the engines. I understand they are pretty quiet versus the dinosaur I have? Any idea on pricing? Also, the 6.5 does what I need, but any advantage to going bigger. Don’t want to break thee bank, but need to start planning now Thanks in advance.

Hello all,
I just spent quite a few hours over the last week fixing blisters and then bottom painting the boat (what fun!)
My question is should I paint the props and rudders? It looks like they may have been painted before. They are off the boat now for transport and I cleaned them completely.
Looking around the marina I am in, it seems to be a 50/50 split on painting them.
What say you all?