Ok I found my next Boat. It's a 2001 Carver 350 Mariner in good condition with both motors replaced and under 100 hours.

The weird part is things on the boat its self.

I got the build sheets from Carver and they are pretty straight forward.

But the boat has a few things that dont quite belong to a 2001.

First the dash layout. Going thru the owners manuals for each year. This dash doesnt appear until 2004. Ok maybe someone changed it possibly. Under the parts list for 2001 it says hulls 1 - 13 ha ...

On a 1997 does anyone know if the Hull is a single layer , double-hulled or any foam within it ?

Trying to find the replacement bow/deck. windows that are beside the top cushion. For a 1986 Carver Mariner. Thought this might be the best place for recommendations for replacement or factory original. Any help would be greatly appreciated!!

Need help or advice on best way to address a leaking fuel tank that is located on port side next to a 3208 motor in a 1990 Carver / Californian. Any help is appreciated.

So I’m the new owner of an old Carver! 1994 320 Voyager and I need to get it moved. This is becoming a major undertaking. This boat has no radar arch and has a 35” draft and 9’11” bridge clearance for a total height of 12’10” and needs to be loaded from the water. No lifts on the whole lake. I found a company who gave me a decent price and set up the move for last Thursday. The day before at about 7pm I finally heard from them that they couldn’t move it till Friday. Ok, I get it, there’s a lot o ...

Hi All,

I'm looking for a Carver 57 to buy. Please keep me posted if you hear of anything becoming available. I'm located in Florida, so anything accessible to the East or Gulf Coast would probably work best.

Thanks!

BoatGal

My starboard and center bildge is dry..there is a hole that allows water from.l starboard side into center and the pump clears it out. ..there is no hole under port side..I have water fairly high in the port side after a washdown..

How does the port side pump out?? There is no hose or drain allowing the water to flow to the center area where batteries are located..

36 mariner.. 2006... thanks

The exterior side entry door to 39MY has a spring-loaded hard plastic pin that snaps into a catch plate in the floor. The pin travels the full height of the door about 24" and has snapped off on the bottom. It's not clear how to remove and replace the pin. Wondering if anyone has any experience with this? Thanks!

Hey folks.

The 15 year old Clarion speakers are distorting and its time to upgrade. I am certain many of you faced similar situations and am interested in how you approached it. As an older system the receiver is not 'bluetooth' capable. That would be a good thing to have given today's streaming technology. I understand that there is a bluetooth receiver that can be plugged into the auxiliary port of the Clarion that will enable this function,

Did you simply replace the speakers? ( 2 on bridg ...

Hello Gang,



My wife and I just closed on a pristine '98 355 Aft Cabin today!



They survey and sea trials revealed nothing but great news and we can't wait to get rolling.



Made the unthinkable move from our beloved sailboat of 15 years. Looking forward to many great experiences on our new Carver.



Just donated to the site this evening and I'll be bombarding all of you with many questions ahead.



OK 1st question: Does anyone have some photos or clever ideas on how to retrofit the goofy angled cabinet on ...