I want to add A/C to my 1991 280 Sedan (the 11' 10" beam model) this spring and I'm hoping for input from this board. I'll first say that this is a very big 28 foot boat with lots of windows, but my main concern is cooling in the forward State room for comfortable sleeping. Were outside most of the time during the day anyway, but trying to sleep in the forward state room after a hot sunny day is difficult. There is an accordion style door to separate that stateroom from the main cabin and I'm ho ...

I am planning on replacing the Delta anchor on my 3607 with a ROCNA or VULCAN and would like to know if anyone else has installed either of these on their 3607. What weight did you buy? Rocna or Vulcan? Does the Rocna roll bar get in the way?

All, Does anyone know if its possible to drill a hole into the rear cockpit sides in order to insert the angled rod holders? I'm more interested in using these to hold a grill but they could be used for rods on occasion...

Just wondering if anyone has seen this on a mid 80's Mariner. The glass seems really thick in this area so I'm not looking forward to drilling to find out this isn't possible/feasible.

I read through the 89 post regarding velvet drives and gained enough insight to simply ask a few questions before proceeding.

So I have the 20-01-005 Velvet Drive as shown. I have put about 75 hours on the boat since I purchased it last summer mainly driving it almost home. Total hours currently are 444 and 435.



Dipstick is showing add at the bottom line which I would call a quart low after sitting a few days. Half way on the stick after it is warmed up.



Is it due for a transmission fluid change? ...

I have two blades damaged on a 4 blade 23" prop. The tips curled under and some sections broke off. The damage is all less than 1/2" from the ends. The boat yard said to replace it and the prop guy couldn't do anything. We just finished a list of fixes, so adding another $2000 for a prop hurts. Question: I know props are engineered to match, but if I file edges down smooth making two of the blades less than 1/2" shorter, will the problem be minor or major? I run between 5-7 knots, so if it's a m ...

Hello to all! My wife and I have purchased a 1996 430 about 4 months back and are full time liveaboards in DC. Transitioning from a traditional houseboat to a cruiser.

Look forward to learning about this boat from you fine people.

Dan

Hi I have a 1989 3807 Aft Cabin and I need to remove the Sectional couch any ideas- too big to fit through the doors.

Any help would be great.

Matt

New boat owner here. Most of the text on the dash panel is faded beyond recognition. I would greatly appreciate it if someone could send me a photo of what it is supposed to look like so I don't have to trace every wire back.

Thanks!

So last fall the neighbors 7.4L Merc is giving him some hard starting issues. So for shit's and giggles I pull his distributor cap and low and behold the rotor end and everyone of the distributor firing pins is corroded with that green build up scale. So we put a new cap and rotor in and change out all the spark plugs. Starting issue much better. So later this fall I'm changing my oil and filters and for shit's and giggles I decided to pull my distributor cap. Low and behold if my distributor ca ...

We just purchased our first boat, a 1987 3607 aft . We live in Knoxville, Tn. and it would be nice to meet some fellow Carver owners and get advise on places to go on Tellico and Fort Loudon lakes.