Happy beginning of summer, finally!
My vacuflush kicks in intermittently. Still holds water in the bowl and works fine just starts pressurizing randomly. I called Dometic (it's a VG 12VDC) and they said it's probably the duck bills. I have a panel in the aft stateroom fwd locker thats roughly 18' h x 12" w. I can see it through the wood frame. it looks like there's fiberglass hood around it.I The unit is fwd of the bed so I took off the mattress and there doesn't seem to be any type of access at ...

Hello all.
Today a I received a letter from the "Vessel Documentation Portal" claiming my documentation is set to expire.

The Website www.vesselrenewal.us and the letter sure look like they are from the USCG, but it is some type of service that will renew your docs for $75.00 not the $26.00 I just paid the USCG last month for the same service.

That's a major mark up for a zero value service, beware!

On 6/3/20,sanded taped and gel coated the port side deck on my 28' Carver.Today 6/5,did the other side.Used a 3" high nap roller that left the surface with a little texture that isn't slippery. Looks so much better.Also had to fix GPS/depth finder.Tracked it down to a ground wire that needed a new end on the buss bar.

Ok guys, on my 356 next to my battery switch, there are 3 breakers for the bilge pumps and 2 for the sump pumps. They are not your standard breaker panel breaker switches.

How do you switch them on and off?

Glad to have found this resource! Bought my first cruiser last summer 1985 carver Riviera aft cabin 28. Boats in beautiful condition, hope to keep it that way! Been boating my whole life, but owning a cruiser has opened my eyes to how much I dont know about these boats.
I like to try and do my own work when possible, so I'm sure I'll be here a lot!
Cheers!
Brian

My marina seems to have a hard time emptying my aft tank so I’m getting a bad odor. They think it’s because there is one vent for the 2 tanks. Does/has anyone else had this issue? If so , any suggestions for how to fix this? I find sometimes when I flush some odor escapes inside the cabin so maybe have air leaching and preventing them from pumping it out empty? Any help would be greatly appreciated!! Thanks

Wondering what others have for dinghy davits and what the weight limits are?

Our 2001 has 500# one but would like to get a bigger dinghy. The new dinghy would probably be in the 700#-900# range.

TIA

Doug

Good morning, I am in the process of learning all about shaft packing. I was in the bilges of my 1985 3227 tightening my packing nut. I realized as I was wedged between the engines that this should have been something I looked at out of the water, lesson learned. I managed to get the flow of water cut in half. But I think I need to repack it correctly. I was wondering, before I went and bought a micrometer or some type of measuring gauge if any one knows the right size of packing for the 3227 wi ...

Hey all
I am going to have my new to me boat bottom painted and want to replace all the zincs while I can.
The boats not here yet so I cant just go look at it to see what I need in the way of zincs.
I know I need the 2 zincs [1 1/2"] for the shafts but what others do i need and what are the sizes?
I want to have them In hand before boat gets here.

First post... First Carver owned.



My Kohler generator has mind of its own. Some days it will run from the time we leave slip to the time return 8 hours later. Other days will run for 15 min and shut off. Some days it runs while I’m cruising, some days nope. Some days it will run when cove’d out and you guessed it, some days it will not. Acts this way whether the gas tanks are full and while their low.



Here is what I have done:

Serviced twice with oil changes and filters

New impeller

New spark plug ...