We are new to the site and forum and based upon what we have learned as non members we are excited to learn more and support the site. We are live aboards on a 1983 3607 and we have so much to learn so looking forward to sharing and inquiring. MW Sharing sunset from tonight here.

Hello everyone.i have been boating for 50 years now and bought my first carver in July.its a 3608 mint condition.is there anything I should be aware of regarding nuances and little weird things about this boat? Thanks james parry sound ontario

Did the 1977 Santa Cruz not come with a cabin heater? If it did, can someone please help me locate it? It’s getting colder here in the NW.

Hello everybody, I’m new to dealing with Carver Yachts, however a customer of mine recently purchased a 01 380 Santego in which I’m looking around for valuable information regarding it. This places seems like full library of knowledge to be had so I appreciate any patients with me that you may have to have.

Hey All - So I am new to my 396, and found something I have always looked for. Below is a table of fuel flows. Not sure if it will hold its format well, but though I would share it with you all. I think its pretty useful and SUPER hard to find for different boats. Anyway.. enjoy!!

Can anyone tell me if there is an easy access to the underside of the helm in a 95 330 Mariner? I need to replace my GPS connection cable, but do not see any easy access plate. There is a big empty space directly under the helm, for feet while sitting or minimal gear, but connecting stuff upside down would be challenging. Thx in advance. er

I have small oil leak from turbo advised most likely a seal. Marina says they take off and send out for repair. Does this sound okay and what is expected cost for this procedure. Also advised waste gates broken. How would this happen? Advised this is about $200 per side

Hi everyone, we just purchased a 2000 506 MY in August. We have a 12’ Highfield center console dinghy with a 40hp it weighs 650lbs, we want to put it on a lift on the swim platform. We had it on a lift on our previous boat 2002 400 Sea Ray Sedan Bridge. Has anyone put a lift on their boat? Any suggestions?

Hello all,

I recently installed a vent fan and duct system for the stove in my 2004 396.( this is the one with the dinette layout.) I used a cheap inline bilge blower and good quality flexible hose. I chose a closable heat system type intake so I can close it off when not in use. I installed a little rocker switch above the microwave so it wasn't right over the cooktop. I used the electric feed for the front cabin DVD, which no one uses anymore. Between removing the microwave, and the back panel ...

Just wanted to say hi to all from Louisiana! We will be finishing up the deal on our "new to us" 2000 406 Aft cabin next week and then shortly after motoring her home from Texas to Louisiana. We are not new to the boating world, only new to the cruiser style. We have been running a 28' 700 hp catamaran all along the gulf coast attending as many poker runs and go-fast events as we can and now we are going to enjoy our time on the water at a slower pace.

P.S. we are still comparing insu ...